Our Services
What we can do for you
Whether you're taking your first step toward water conservation with a simple water butt or you're ready for a full rainwater harvesting system, we have the expertise to help. Every service is delivered with attention to detail, quality materials, and a commitment to leaving your property better than we found it. Here's everything we offer.
Water Butt Installation
We supply and install a wide range of water butts to suit any garden size and budget. Whether you have a sprawling lawn or a compact city courtyard, we'll help you find the perfect tank and get it set up in no time. Our range includes classic round barrels in traditional green or terracotta finishes, slim-line designs that tuck neatly against walls and fences, and large-capacity tanks capable of holding several hundred litres. Every installation comes with a full assessment of your downpipe configuration to identify the best position for your butt, ensuring maximum water capture without obstructing your pathway or patio. We handle the heavy lifting, connect the diverter to your downpipe, install the stand to give you enough height for filling watering cans, and test everything before we leave. We can also link multiple water butts together if one tank isn't enough, creating a daisy-chain system that dramatically increases your storage capacity. All fittings are weather-resistant and built to last, so your installation will look tidy and perform reliably for years. We'll also walk you through the basics of using your new system — how the diverter works, when to expect overflow, and how to maintain your butt through the seasons. With our installation service, you can start harvesting rainwater from the very first downpour after we've been.
Gutter Cleaning
Clean gutters are essential for protecting your home from water damage — and they're also the first step in any effective rainwater harvesting setup. Our gutter cleaning service is thorough, safe, and leaves your property looking pristine. We begin with a full inspection of your guttering system from ground level, noting any visible sagging, misalignment, or damage. Using ladders and safety equipment, we then remove all debris by hand — leaves, twigs, moss, silt, and even the occasional tennis ball or child's toy. We pay special attention to corners, joints, and downpipe outlets where blockages are most likely to occur. After clearing the gutters, we flush them with water to confirm they're flowing freely and to identify any slow spots or leaks we might have missed. Downpipes are cleared using flexible rods or pressure flushing to dislodge stubborn blockages deep within the system. We also check that your gutter outlets align properly with your downpipe diverter (if you have one), because a misaligned diverter means wasted rainwater and potential overflowing. Our service extends to clearing moss from roof tiles where it's causing debris buildup, and we can advise on gutter guards or leaf mesh if your gutters seem to clog particularly fast. We'll leave your property tidy, bagging all removed debris for disposal or composting. Regular gutter cleaning not only protects your home's foundations and prevents damp walls, but it also ensures every rainfall makes its way into your water butt rather than spilling over blocked gutters onto the ground.
Rainwater Harvesting Systems
For those who want to take water conservation to the next level, we design and install full rainwater harvesting systems that go far beyond a single water butt. These systems are ideal for keen gardeners with greenhouses or polytunnels, homeowners who want to reduce their metered water bills, and anyone looking to live more sustainably. A typical system includes an underground or above-ground storage tank ranging from 1,000 to 5,000 litres, a submerged pump with mains water back-up, a filtration unit to keep debris and sediment out of the supply, and pipework running to outdoor taps, irrigation lines, or even indoor appliances like toilets and washing machines (with the appropriate treatment). We start every project with a site survey to assess your roof area, average rainfall in your region, and intended water usage. This allows us to calculate the right tank size and specify the correct pump pressure for your needs. Installation involves excavating a tank base (for underground systems), running supply pipes through the garden, connecting to your existing downpipes via a collection manifold, and wiring the pump control unit. We handle all the groundwork, plumbing connections, and electrical work, and we make sure the system complies with UK water regulations, including the mandatory air gap to prevent backflow into the mains supply. A well-designed rainwater harvesting system can supply the majority of a household's non-potable water needs, reducing mains water consumption by up to 50% and cutting annual water bills significantly. We'll talk you through the maintenance requirements, filter cleaning schedule, and winter care so your system keeps performing at its best year after year.
Downpipe Diverter Installation
A downpipe diverter is the unsung hero of every water butt setup. It's the clever piece of kit that redirects water from your gutter downpipe into your tank while allowing excess to flow away normally when the butt is full. A poorly fitted diverter can mean leaks, wasted water, or even damage to your guttering system, so it's worth getting it right. We install all the main types of diverter, including rigid plastic units that replace a section of your downpipe, flexible hose diverters that are quick to fit on square or round downpipes, and rainwater collection heads that sit at the top of the downpipe and filter out leaves and debris before the water even enters the system. We'll assess your existing downpipe material — PVC, cast iron, or aluminium — and recommend the best diverter type for your setup. Installation involves cutting a precise section from your downpipe (if required), fitting the diverter body, connecting the outlet to your water butt with the supplied hose or pipe, and sealing all joints to prevent leaks. We position the diverter at the correct height relative to your water butt stand so the water flows with a good gradient and the butt fills efficiently. We also install rain traps or first-flush diverters that discard the first few litres of a downpour (which wash dust, bird droppings, and roof debris off your tiles) so only cleaner water enters your tank. This is especially important if you plan to use the water on edible plants. We test every connection under flow conditions and adjust the alignment if needed. Once fitted, your diverter should operate silently and automatically, filling your water butt with every shower and diverting overflow harmlessly back into the drainage system without you lifting a finger.
Water Butt Repairs & Parts
Water butts take a beating from the British weather — constant UV exposure, freezing winter temperatures, and the weight of hundreds of litres of water can take their toll over time. Before you give up on a cracked or leaking butt and send it to the landfill, give us a call. We repair most makes and models of domestic water butts, from budget DIY-store barrels to premium branded tanks, and we stock a comprehensive range of common spare parts. Common repairs include fixing cracks and splits in plastic tanks using specialist waterproof adhesives and reinforcement patches that restore the structural integrity of the butt. We replace worn-out tap mechanisms — the most frequently failing component on any water butt — with sturdy brass or heavy-duty plastic replacements that won't drip or seize up. Missing or damaged lids are replaced to keep debris, mosquitoes, and children or pets out of your stored water. We supply and fit new diverter kits, replacement hose tails, and connecting pipes if your existing setup has perished or gone missing. Stands that have rotted or rusted can be swapped for new powder-coated steel or recycled plastic stands that will outlast the butt itself. We also carry seal kits for threaded connections, replacement tap washers, and overflow kits for linking multiple butts together. If your water butt has developed algae growth or an unpleasant smell, we can advise on cleaning treatments and fit a fine-mesh pre-filter to keep future water cleaner. Repairing a water butt costs a fraction of replacing one, and it keeps perfectly good plastic out of the waste stream. We'll be honest with you if a repair isn't economical, but in most cases we can have your existing setup back in action within a few days.
Winter Preparation & Maintenance
The British winter is the toughest test your rainwater harvesting system will face. Freezing temperatures can crack plastic tanks, burst pipework, and destroy pump mechanisms if water is left to expand inside them. Our winter preparation service protects your investment and ensures your system wakes up healthy in the spring. We start by draining down your water butt completely if a hard frost is forecast or if you won't be using the water over winter. We disconnect the downpipe diverter to prevent water from entering the tank and freezing, and we cap the diverter outlet to keep your guttering functional. If you'd prefer to keep your system running through the winter (many people continue to water greenhouses or indoor plants), we can insulate exposed pipes with foam lagging, wrap the tank in insulating material, and fit a tank heater or submersible pump heater that activates automatically when temperatures approach freezing. We check for any existing cracks or weak points in the tank that could worsen with frost, and we reinforce them before the cold sets in. Stands are checked for stability — a frozen water butt is extremely heavy, and a wobbly stand can tip in icy conditions. We also clean out the tank before winter storage to prevent stagnant water from breeding mosquitoes or developing unpleasant odours by spring. For more complex harvesting systems with pumps and filtration, we drain the pump housing, remove and store the filter cartridge indoors, and flush the pipes with antifreeze where appropriate. We can also set up a winter watering plan if you need to keep certain plants hydrated during dry winter spells. Our spring recommissioning service gets everything back online: reconnecting diverters, refilling tanks, checking for damage, and testing the flow. A small investment in winter preparation saves you the hassle and expense of replacing burst components when the thaw arrives.
From enquiry to rainwater
We've kept things simple. Here's what to expect when you work with us.
- 01
Book a Free Survey
Contact us to arrange a no-obligation site visit. We'll assess your property, measure your downpipes, discuss your water collection goals, and recommend the best setup for your space and budget.
- 02
Receive a Tailored Quote
We'll send you a clear, itemised quote with no hidden extras. You'll see exactly what's included — equipment, labour, disposal of old parts, and any follow-up support.
- 03
We Install or Maintain
On the agreed date, we'll arrive on time with everything needed. Most installations are completed within half a day, and we always clean up thoroughly before we leave.
- 04
Enjoy Your Rainwater
Start using your new system straight away. We'll show you how everything works and leave you with simple care instructions so you can keep it running smoothly.
Rainwater is our speciality
We're not general handymen who fit water butts as a side job. We focus on rainwater harvesting and nothing else, which means we do it better than anyone else.
- We specialise in rainwater harvesting — it's all we do, so we know it inside out.
- Fully insured with public liability cover for your peace of mind.
- Free, no-obligation surveys and quotes with transparent pricing.
- We use quality equipment from trusted British and European manufacturers.
- All installations come with a 12-month workmanship guarantee.
- We're local, reliable, and we clean up after ourselves.
- We offer ongoing support and maintenance, not just a one-off install.
- Environmentally conscious — we repair before we replace and recycle old parts.
Frequently asked questions
Got a question? We've probably heard it before. Here are the answers to the things people ask us most often.
How much does a water butt installation cost?
The cost varies depending on the size and type of water butt, the complexity of the installation, and whether any additional parts like stands or linking kits are needed. A standard installation with a typical 200-litre water butt starts from around £120 including the butt, diverter, and labour. Larger tanks or more complex setups may cost more — we always provide a free quote before any work begins, so there are no surprises.
Do I need planning permission for a rainwater harvesting system?
In most cases, no. A standard water butt connected to a downpipe is considered a permitted development and does not require planning permission. Larger underground rainwater harvesting systems may need building regulations approval, especially if they connect to indoor plumbing. We handle all the relevant permissions and can advise on what's needed for your specific project during the free survey.
How often should I clean my gutters?
We recommend cleaning your gutters at least twice a year — once in late autumn after the leaves have fallen, and once in early spring to clear any winter debris. Properties under or near trees may need more frequent cleaning. Signs that your gutters need attention include water spilling over the sides during rain, birds nesting in the gutter, plants growing out of the trough, or visible sagging under the weight of trapped debris.
Can I drink the water from my water butt?
No. Rainwater collected from rooftops is not suitable for drinking unless it goes through an extensive treatment and filtration system. Water butts collect runoff that may contain bird droppings, dust, moss spores, and other contaminants. The water is perfectly safe for watering plants, washing cars, cleaning patios, and other outdoor uses, but it should not be consumed by humans or pets.
What size water butt do I need?
A standard 200-litre water butt is sufficient for most average-sized gardens and provides enough water for routine watering of flower beds, pots, and small lawns. If you have a large vegetable patch, a greenhouse, or several flower beds, consider a 300- to 500-litre tank or link multiple butts together. As a rule of thumb, each square metre of roof area can collect around one litre of water for every millimetre of rainfall, so a typical house roof can fill several large butts in a single downpour.
Do you cover my area?
We cover the whole of the South East and East of England, including Norfolk, Suffolk, Essex, Cambridgeshire, Bedfordshire, Hertfordshire, and parts of Greater London. If you're unsure whether we cover your postcode, get in touch and we'll let you know. We're happy to travel a bit further for larger projects or multiple installations.
What happens if my water butt springs a leak?
Don't throw it away — call us. Many cracks and splits can be repaired using specialist plastic welding or marine-grade adhesives. We stock replacement taps, washers, lids, and connectors for most makes and models. If the damage is too severe to repair, we can supply and install a replacement butt, often reusing your existing diverter and stand to keep costs down.
How do I stop my water butt going green or smelly?
Algae growth and odours are caused by sunlight and organic matter entering the water. Keeping your water butt opaque (not translucent) and ensuring the lid is securely fitted will block most light and prevent algae. Fitting a fine-mesh pre-filter at the diverter point stops leaves and debris from entering the tank. If your butt already has algae, we can drain, clean, and treat it with a mild disinfectant solution safe for garden use. Regular cleaning once a year is the best prevention.
Can you connect multiple water butts together?
Yes, this is one of our most popular installations. Linking kits allow two or more water butts to be connected at the base so they fill evenly and provide a combined storage capacity. When one butt is full, the water flows into the next, and so on. This is a great solution if you have a large roof area and want to maximise your rainwater storage without installing a single enormous tank.
Is there a guarantee on your work?
Absolutely. All our installation and repair work is backed by a 12-month workmanship guarantee. If anything goes wrong as a result of our fitting, we'll come back and put it right at no extra cost. Equipment and parts carry their own manufacturer's warranties, which we'll explain at the time of installation. Our aim is to leave you with a system that works reliably for years.
Ready to Get Started?
Contact us today for a free, no-obligation quote. We're here to help with any project — big or small.